Formaldehyde
The Unsuspected Air Polluter

Most governing bodies or environmental standards groups suggest formaldehyde concentrations not exceed 80–100 ppb for short-term exposure and 40–50 ppb for long-term exposures.

Health Symptoms
Formaldehyde Reduction
Identify & remove/seal the offending materials
Increase fresh air entry into the home
Install a Potassium Permanganate (P.P.) filter
Install a Potassium Permanganate (P.P.) filter on the furnace and operate the furnace fan in the “ON” mode instead of “AUTO.” These filters can be made to order by providing the dimensions of your current furnace filter. Charcoal filters are effective for absorbing other chemicals but P.P. filters are needed for formaldehyde. If you later decide to do a VOC test for your home and it is found that the VOC levels are elevated as well, then you could switch to a filter with a combination of charcoal for the VOCs and P.P. for the formaldehyde.
Seal offending surfaces
Seal offending surfaces with AFM Safecoat Products:
- SAFE SEAL for raw particleboard and oriented strand board (OSB)
- HARD SEAL for already varnished surfaces but not flooring
- POLYURESEAL for flooring
Operate an air purifier
Operate an air purifier with charcoal and P.P. such as the Foust 160R2 for smaller rooms like bedrooms or the or Series400 for larger rooms like the living room. This method is the least effective.
Utilize a Carpet Sealer
If the carpeting is the culprit, SafeChoice Carpet Seal (an AFM Product) can be used to block the outgassing.